Padded Drum Kit

ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New

ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New
ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New
ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New
ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New

ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New

Number of drum kits: 100 (preset: 55). Effects: Pad Compressor (for each pad), Pad Equalizer (for each pad), Overhead Mic Simulator, Room/Reverb, Multi Effects: 3 systems/30 types, Master Compressor, Master Equalizer. Bluetooth compatible standard = Bluetooth standard Ver 4.2, compatible profile = A2DP (audio) GATT (MIDI over Bluetooth Low Energy), compatible codec = SBC (supports content protection by SCMS-T method). Song player (SD card): File format: WAV (44.1 kHz, 16/24 bit), MP3 Audio files must be saved on the SD card. Recorder: Recording method = real time, maximum recording time = 60 minutes (temporary recording: 3 minutes).

An SD card is required for recording. If you don't have an SD card, you can temporarily record about 3 minutes, but you can't save it to the main unit. File format = WAV (44.1 kHz, 16 bits). Display: Graphic LCD 256 x 80 dots?

External memory: SD card (SDHC compatible). TRIGGER INPUT jack x 1 (kick, snare, tom 1, tom 2, tom 3, hi-hat, crash 1, ride, ride bell, hi-hat control): 25-pin D-sub type Exclusive use with pads that support digital connection. TRIGGER IN terminal x 4 (Crash 2, AUX 1, AUX 2, AUX 3): TRS standard type?

Exclusive use with pads that support digital connection. DIGITAL TRIGGER IN terminal x 3: USB A type, MASTER OUT terminal x 2 (L/MONO, R): standard type, DIRECT OUT terminal x 2: (MONO) standard type.

PHONES terminal x 1: stereo standard type, MIX IN terminal x 1: stereo standard type, MIDI terminal (IN, OUT/THRU), USB COMPUTER terminal x 1: USB B type. FOOT SW terminal x 1: TRS standard type, DC IN terminal. USB COMPUTER terminal speed = Hi-speed USB, driver mode = generic/vendor, compatible communication = USB-MIDI/USB-Audio. To use USB audio, it is necessary to change to vendor mode and use the vendor driver.

USB audio sampling frequency (original) = 44.1 kHz, sampling frequency (using sampling rate converter) = 96 kHz, 48 kHz, recording = 28 channels, playback = 4 channels. Power supply: AC adapter (DC9V)? International Buyers - Please Note. Thank you for your understanding.
ROLAND TD-27 Drum Sound Module Prismatic Sound Modeling Technology! New